Freeze Drying Chambers and Equipment
Sklar Instruments Splinter Removal Sklar Microscopy Surgical 1/EA
Splinter Removal Sklar Microscopy Surgical 1/EA
Ace Glass, Inc. Vacuum manifold with five variable opening, 0-10mm high vacuum threaded stopcock ports. 375mm overall length with left side hose connection. PTFE plugs with UHDPE handles.
All-glass-and-PTFE vacuum manifold with five left side stopcock ports. Each port is a variable opening, 0-10mm, high vacuum threaded stopcock. Plugs are PTFE with Nylon or PTFE handles and FETFE O-Rings. Ultimate vacuum of 10-7 can be realized with O-Rings as supplied.
Bellco Glass, Inc. 3-Port Thermowell Assembly ,6L Low Profile - For Vertical Side Arm Vessels
Thermowell assemblies are used to hold inside one tube the rtd temperature sensor that monitors the temperature within the vessel in conjunction with a temperature controller. There are also tubes for addition of media and vent tube. For low profile 6L Vessel. MADE IN THE USA. Material: 316L SST with Ra 32 or better - inside & outOne Vent port; .250"OD x .152" ID x 1.0"above & below cap slugOne Addition port: .250"OD x .152"ID x 10 9/32" insertion lengthOne Thermowell port: .375"OD x .305"ID x 10 9/32" insertion lengthAll tubes seam weld in to cap slug - bottom side onlySupply with 45mm PP blue open top screw cap & white silicone gasket
Bellco Glass, Inc. Thermowell Assembly , 6L For Angled Sidearms
Thermowell assemblies are used to hold inside one tube the rtd temperature sensor that monitors the temperature within the vessel in conjunction with a temperature controller. There are also tubes for addition of media and vent tube. MADE IN THE USA. •Thermowell assemblies for 1965 and 1967-style angled sidearm flasks, 3-port•5/16" od thermowell tube,1/4" siphon and vent tubes•Includes 45mm pp cap and silicone gasket•Seam welded and electropolished finish - outside only•All tubes: 316l sst•Longest tube length @ curve: 10 1/2"
TA Instruments HA Aluminum Double Gap Concentric Cylinder Cup, Inner Radius 15.1 mm, Outer Radius 18.5 mm, for HR X0, DHR and AR-Series Peltier Jacket
Waters TA Instruments HA Aluminum Double Gap Concentric Cylinder Cup has an inner radius of 15.1 mm and outer radius of 18.5 mm. It is for use with HR X0, DHR, and AR-Series Peltier Jacket.
Sigma Aldrich Fine Chemicals Biosciences Drying tube complete for B1EA
The Buchi B-585 glass drying oven (Z563080 and Z616818) has a completely replaceable drying tube assembly. Assembly comes with the drying tube desiccant bulb and removeable vacuum connections. A maximum of 100 mL to 250 mL can be dried using the drying accessory. If required the drying tube can be ventilated with protective gas. The drying hood can be filled with a drying SOLUTIONon (silica gel CaCl2 or P2O5) to dry strongly hygroscopic substances.
Bellco Glass, Inc. 3 Tier Rocker Tray
Tray is 11" long, 7" deep and 4 5/8" high.There is approximately 2" between the trays.It's sst and there are no liners.. MADE IN THE USA
Chemglass Life Sciences Drying Apparatus, Abderhalden, Modified, Complete, 695mm Height x 435mm Width
Drying Apparatus, Abderhalden, Modified, Complete, 695mm Height x 435mm Width. Modified Abderhalden drying apparatus with a 57mm flat o-ring connection between the desiccant flask and the drying chamber to permit easy sample removal after drying. The drying chamber has an I.D. of 2” and is 8” long. The desiccant flask has a 4mm glass stopcock and a serrated connection for the vacuum source. The flask and condenser joints are 24/40. Complete apparatus consists of a drying chamber, desiccant flask, condenser, clamp and Viton o-ring.
Bellco Glass, Inc. Low Profile 3-Port Sparger W/Holes,6L For Vertical Side Arm Vessels
316-l stainless steel ra32 or better finish.040" drilled holes sparger for low profile vertical side arm vessels. MADE IN THE USA. Threaded end is removable for cleaning.Comes with 45mm blue polypropylene open top cap and silicone gasket.Triple tube configuration With Vent, Fill/Sample And Sparge.